Key Specifications

Connectivity & Integration

• DICOM 3.0 basic Grayscale/Colour print Service Class Provider (SCP)
• DICOM 3.0 presentation LUT SCP
• DICOM 3.0 Grayscale standard display function (optional)
• TCP/IP

Features

• Connect with almost all imaging modalities (CT, MR, DR, US, XA, NM, SC)
• or workstations
• Free format selection
• Control like a laser camera
• Calibration
• Several sources configurable

Multifunction Device Specifications

Compatible with aycan certified multifunction devices only

• Pentium PIII processor
• 256 MB RAM
• 4 GB hard disk
• 10/100 MBit network adapter
  

FDA certified: FDA classification

The aycan xray-print solution is certified as a medical image communication device (class 1 Exempt, Sec. 892.2020)

Environmentally Safe

Because the aycan xray-print solution reduces the need for chemical-based film processing and equipment, it has a positive impact on the environmental aspects of your daily operations.
For additional information about aycan xray-print please refer to
www.dicom-paper-print.com

1. This solution is intended for use by referral physicians. Fuji Xerox Australia does not
    represent that it is suitable for diagnostic purposes. Print quality will vary between
    devices.
2. This figure excludes the cost of acquiring the technology (i.e. hardware and software)
    and any throughput materials.
3. Paper handling will vary between devices.
4. The DocuCentre-II C2200 is pictured here and on the front cover with an
    optional B-Finisher.